Line data Source code
1 : /*
2 : * Copyright 2016 Advanced Micro Devices, Inc.
3 : *
4 : * Permission is hereby granted, free of charge, to any person obtaining a
5 : * copy of this software and associated documentation files (the "Software"),
6 : * to deal in the Software without restriction, including without limitation
7 : * the rights to use, copy, modify, merge, publish, distribute, sublicense,
8 : * and/or sell copies of the Software, and to permit persons to whom the
9 : * Software is furnished to do so, subject to the following conditions:
10 : *
11 : * The above copyright notice and this permission notice shall be included in
12 : * all copies or substantial portions of the Software.
13 : *
14 : * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
15 : * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
16 : * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
17 : * THE COPYRIGHT HOLDER(S) OR AUTHOR(S) BE LIABLE FOR ANY CLAIM, DAMAGES OR
18 : * OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
19 : * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
20 : * OTHER DEALINGS IN THE SOFTWARE.
21 : *
22 : * Authors: AMD
23 : *
24 : */
25 :
26 : #include "dce110/dce110_hw_sequencer.h"
27 : #include "dcn10/dcn10_hw_sequencer.h"
28 : #include "dcn20_hwseq.h"
29 :
30 : #include "dcn20_init.h"
31 :
32 : static const struct hw_sequencer_funcs dcn20_funcs = {
33 : .program_gamut_remap = dcn10_program_gamut_remap,
34 : .init_hw = dcn10_init_hw,
35 : .power_down_on_boot = dcn10_power_down_on_boot,
36 : .apply_ctx_to_hw = dce110_apply_ctx_to_hw,
37 : .apply_ctx_for_surface = NULL,
38 : .program_front_end_for_ctx = dcn20_program_front_end_for_ctx,
39 : .wait_for_pending_cleared = dcn10_wait_for_pending_cleared,
40 : .post_unlock_program_front_end = dcn20_post_unlock_program_front_end,
41 : .update_plane_addr = dcn20_update_plane_addr,
42 : .update_dchub = dcn10_update_dchub,
43 : .update_pending_status = dcn10_update_pending_status,
44 : .program_output_csc = dcn20_program_output_csc,
45 : .enable_accelerated_mode = dce110_enable_accelerated_mode,
46 : .enable_timing_synchronization = dcn10_enable_timing_synchronization,
47 : .enable_vblanks_synchronization = dcn10_enable_vblanks_synchronization,
48 : .enable_per_frame_crtc_position_reset = dcn10_enable_per_frame_crtc_position_reset,
49 : .update_info_frame = dce110_update_info_frame,
50 : .send_immediate_sdp_message = dcn10_send_immediate_sdp_message,
51 : .enable_stream = dcn20_enable_stream,
52 : .disable_stream = dce110_disable_stream,
53 : .unblank_stream = dcn20_unblank_stream,
54 : .blank_stream = dce110_blank_stream,
55 : .enable_audio_stream = dce110_enable_audio_stream,
56 : .disable_audio_stream = dce110_disable_audio_stream,
57 : .disable_plane = dcn20_disable_plane,
58 : .pipe_control_lock = dcn20_pipe_control_lock,
59 : .interdependent_update_lock = dcn10_lock_all_pipes,
60 : .cursor_lock = dcn10_cursor_lock,
61 : .prepare_bandwidth = dcn20_prepare_bandwidth,
62 : .optimize_bandwidth = dcn20_optimize_bandwidth,
63 : .update_bandwidth = dcn20_update_bandwidth,
64 : .set_drr = dcn10_set_drr,
65 : .get_position = dcn10_get_position,
66 : .set_static_screen_control = dcn10_set_static_screen_control,
67 : .setup_stereo = dcn10_setup_stereo,
68 : .set_avmute = dce110_set_avmute,
69 : .log_hw_state = dcn10_log_hw_state,
70 : .get_hw_state = dcn10_get_hw_state,
71 : .clear_status_bits = dcn10_clear_status_bits,
72 : .wait_for_mpcc_disconnect = dcn10_wait_for_mpcc_disconnect,
73 : .edp_backlight_control = dce110_edp_backlight_control,
74 : .edp_power_control = dce110_edp_power_control,
75 : .edp_wait_for_hpd_ready = dce110_edp_wait_for_hpd_ready,
76 : .set_cursor_position = dcn10_set_cursor_position,
77 : .set_cursor_attribute = dcn10_set_cursor_attribute,
78 : .set_cursor_sdr_white_level = dcn10_set_cursor_sdr_white_level,
79 : .setup_periodic_interrupt = dcn10_setup_periodic_interrupt,
80 : .set_clock = dcn10_set_clock,
81 : .get_clock = dcn10_get_clock,
82 : .program_triplebuffer = dcn20_program_triple_buffer,
83 : .enable_writeback = dcn20_enable_writeback,
84 : .disable_writeback = dcn20_disable_writeback,
85 : .dmdata_status_done = dcn20_dmdata_status_done,
86 : .program_dmdata_engine = dcn20_program_dmdata_engine,
87 : .set_dmdata_attributes = dcn20_set_dmdata_attributes,
88 : .init_sys_ctx = dcn20_init_sys_ctx,
89 : .init_vm_ctx = dcn20_init_vm_ctx,
90 : .set_flip_control_gsl = dcn20_set_flip_control_gsl,
91 : .get_vupdate_offset_from_vsync = dcn10_get_vupdate_offset_from_vsync,
92 : .calc_vupdate_position = dcn10_calc_vupdate_position,
93 : .set_backlight_level = dce110_set_backlight_level,
94 : .set_abm_immediate_disable = dce110_set_abm_immediate_disable,
95 : .set_pipe = dce110_set_pipe,
96 : #ifndef TRIM_FSFT
97 : .optimize_timing_for_fsft = dcn20_optimize_timing_for_fsft,
98 : #endif
99 : .set_disp_pattern_generator = dcn20_set_disp_pattern_generator,
100 : .get_dcc_en_bits = dcn10_get_dcc_en_bits,
101 : .update_visual_confirm_color = dcn20_update_visual_confirm_color
102 : };
103 :
104 : static const struct hwseq_private_funcs dcn20_private_funcs = {
105 : .init_pipes = dcn10_init_pipes,
106 : .update_plane_addr = dcn20_update_plane_addr,
107 : .plane_atomic_disconnect = dcn10_plane_atomic_disconnect,
108 : .update_mpcc = dcn20_update_mpcc,
109 : .set_input_transfer_func = dcn20_set_input_transfer_func,
110 : .set_output_transfer_func = dcn20_set_output_transfer_func,
111 : .power_down = dce110_power_down,
112 : .enable_display_power_gating = dcn10_dummy_display_power_gating,
113 : .blank_pixel_data = dcn20_blank_pixel_data,
114 : .reset_hw_ctx_wrap = dcn20_reset_hw_ctx_wrap,
115 : .enable_stream_timing = dcn20_enable_stream_timing,
116 : .edp_backlight_control = dce110_edp_backlight_control,
117 : .disable_stream_gating = dcn20_disable_stream_gating,
118 : .enable_stream_gating = dcn20_enable_stream_gating,
119 : .setup_vupdate_interrupt = dcn20_setup_vupdate_interrupt,
120 : .did_underflow_occur = dcn10_did_underflow_occur,
121 : .init_blank = dcn20_init_blank,
122 : .disable_vga = dcn20_disable_vga,
123 : .bios_golden_init = dcn10_bios_golden_init,
124 : .plane_atomic_disable = dcn20_plane_atomic_disable,
125 : .plane_atomic_power_down = dcn10_plane_atomic_power_down,
126 : .enable_power_gating_plane = dcn20_enable_power_gating_plane,
127 : .dpp_pg_control = dcn20_dpp_pg_control,
128 : .hubp_pg_control = dcn20_hubp_pg_control,
129 : .update_odm = dcn20_update_odm,
130 : .dsc_pg_control = dcn20_dsc_pg_control,
131 : .set_hdr_multiplier = dcn10_set_hdr_multiplier,
132 : .verify_allow_pstate_change_high = dcn10_verify_allow_pstate_change_high,
133 : .wait_for_blank_complete = dcn20_wait_for_blank_complete,
134 : .dccg_init = dcn20_dccg_init,
135 : .set_blend_lut = dcn20_set_blend_lut,
136 : .set_shaper_3dlut = dcn20_set_shaper_3dlut,
137 : };
138 :
139 0 : void dcn20_hw_sequencer_construct(struct dc *dc)
140 : {
141 0 : dc->hwss = dcn20_funcs;
142 0 : dc->hwseq->funcs = dcn20_private_funcs;
143 :
144 0 : if (IS_FPGA_MAXIMUS_DC(dc->ctx->dce_environment)) {
145 0 : dc->hwss.init_hw = dcn20_fpga_init_hw;
146 0 : dc->hwseq->funcs.init_pipes = NULL;
147 : }
148 0 : }
|
