Line data Source code
1 : // SPDX-License-Identifier: MIT
2 : /*
3 : * Copyright 2022 Advanced Micro Devices, Inc.
4 : *
5 : * Permission is hereby granted, free of charge, to any person obtaining a
6 : * copy of this software and associated documentation files (the "Software"),
7 : * to deal in the Software without restriction, including without limitation
8 : * the rights to use, copy, modify, merge, publish, distribute, sublicense,
9 : * and/or sell copies of the Software, and to permit persons to whom the
10 : * Software is furnished to do so, subject to the following conditions:
11 : *
12 : * The above copyright notice and this permission notice shall be included in
13 : * all copies or substantial portions of the Software.
14 : *
15 : * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
16 : * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
17 : * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
18 : * THE COPYRIGHT HOLDER(S) OR AUTHOR(S) BE LIABLE FOR ANY CLAIM, DAMAGES OR
19 : * OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
20 : * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
21 : * OTHER DEALINGS IN THE SOFTWARE.
22 : *
23 : * Authors: AMD
24 : *
25 : */
26 :
27 : #include "dce110/dce110_hw_sequencer.h"
28 : #include "dcn10/dcn10_hw_sequencer.h"
29 : #include "dcn20/dcn20_hwseq.h"
30 : #include "dcn21/dcn21_hwseq.h"
31 : #include "dcn30/dcn30_hwseq.h"
32 : #include "dcn301/dcn301_hwseq.h"
33 : #include "dcn31/dcn31_hwseq.h"
34 : #include "dcn314/dcn314_hwseq.h"
35 :
36 : #include "dcn314_init.h"
37 :
38 : static const struct hw_sequencer_funcs dcn314_funcs = {
39 : .program_gamut_remap = dcn10_program_gamut_remap,
40 : .init_hw = dcn31_init_hw,
41 : .power_down_on_boot = dcn10_power_down_on_boot,
42 : .apply_ctx_to_hw = dce110_apply_ctx_to_hw,
43 : .apply_ctx_for_surface = NULL,
44 : .program_front_end_for_ctx = dcn20_program_front_end_for_ctx,
45 : .wait_for_pending_cleared = dcn10_wait_for_pending_cleared,
46 : .post_unlock_program_front_end = dcn20_post_unlock_program_front_end,
47 : .update_plane_addr = dcn20_update_plane_addr,
48 : .update_dchub = dcn10_update_dchub,
49 : .update_pending_status = dcn10_update_pending_status,
50 : .program_output_csc = dcn20_program_output_csc,
51 : .enable_accelerated_mode = dce110_enable_accelerated_mode,
52 : .enable_timing_synchronization = dcn10_enable_timing_synchronization,
53 : .enable_per_frame_crtc_position_reset = dcn10_enable_per_frame_crtc_position_reset,
54 : .update_info_frame = dcn31_update_info_frame,
55 : .send_immediate_sdp_message = dcn10_send_immediate_sdp_message,
56 : .enable_stream = dcn20_enable_stream,
57 : .disable_stream = dce110_disable_stream,
58 : .unblank_stream = dcn20_unblank_stream,
59 : .blank_stream = dce110_blank_stream,
60 : .enable_audio_stream = dce110_enable_audio_stream,
61 : .disable_audio_stream = dce110_disable_audio_stream,
62 : .disable_plane = dcn20_disable_plane,
63 : .pipe_control_lock = dcn20_pipe_control_lock,
64 : .interdependent_update_lock = dcn10_lock_all_pipes,
65 : .cursor_lock = dcn10_cursor_lock,
66 : .prepare_bandwidth = dcn20_prepare_bandwidth,
67 : .optimize_bandwidth = dcn20_optimize_bandwidth,
68 : .update_bandwidth = dcn20_update_bandwidth,
69 : .set_drr = dcn10_set_drr,
70 : .get_position = dcn10_get_position,
71 : .set_static_screen_control = dcn10_set_static_screen_control,
72 : .setup_stereo = dcn10_setup_stereo,
73 : .set_avmute = dcn30_set_avmute,
74 : .log_hw_state = dcn10_log_hw_state,
75 : .get_hw_state = dcn10_get_hw_state,
76 : .clear_status_bits = dcn10_clear_status_bits,
77 : .wait_for_mpcc_disconnect = dcn10_wait_for_mpcc_disconnect,
78 : .edp_backlight_control = dce110_edp_backlight_control,
79 : .edp_power_control = dce110_edp_power_control,
80 : .edp_wait_for_T12 = dce110_edp_wait_for_T12,
81 : .edp_wait_for_hpd_ready = dce110_edp_wait_for_hpd_ready,
82 : .set_cursor_position = dcn10_set_cursor_position,
83 : .set_cursor_attribute = dcn10_set_cursor_attribute,
84 : .set_cursor_sdr_white_level = dcn10_set_cursor_sdr_white_level,
85 : .setup_periodic_interrupt = dcn10_setup_periodic_interrupt,
86 : .set_clock = dcn10_set_clock,
87 : .get_clock = dcn10_get_clock,
88 : .program_triplebuffer = dcn20_program_triple_buffer,
89 : .enable_writeback = dcn30_enable_writeback,
90 : .disable_writeback = dcn30_disable_writeback,
91 : .update_writeback = dcn30_update_writeback,
92 : .mmhubbub_warmup = dcn30_mmhubbub_warmup,
93 : .dmdata_status_done = dcn20_dmdata_status_done,
94 : .program_dmdata_engine = dcn30_program_dmdata_engine,
95 : .set_dmdata_attributes = dcn20_set_dmdata_attributes,
96 : .init_sys_ctx = dcn31_init_sys_ctx,
97 : .init_vm_ctx = dcn20_init_vm_ctx,
98 : .set_flip_control_gsl = dcn20_set_flip_control_gsl,
99 : .get_vupdate_offset_from_vsync = dcn10_get_vupdate_offset_from_vsync,
100 : .calc_vupdate_position = dcn10_calc_vupdate_position,
101 : .power_down = dce110_power_down,
102 : .set_backlight_level = dcn21_set_backlight_level,
103 : .set_abm_immediate_disable = dcn21_set_abm_immediate_disable,
104 : .set_pipe = dcn21_set_pipe,
105 : .z10_restore = dcn31_z10_restore,
106 : .z10_save_init = dcn31_z10_save_init,
107 : .set_disp_pattern_generator = dcn30_set_disp_pattern_generator,
108 : .optimize_pwr_state = dcn21_optimize_pwr_state,
109 : .exit_optimized_pwr_state = dcn21_exit_optimized_pwr_state,
110 : .update_visual_confirm_color = dcn20_update_visual_confirm_color,
111 : };
112 :
113 : static const struct hwseq_private_funcs dcn314_private_funcs = {
114 : .init_pipes = dcn10_init_pipes,
115 : .update_plane_addr = dcn20_update_plane_addr,
116 : .plane_atomic_disconnect = dcn10_plane_atomic_disconnect,
117 : .update_mpcc = dcn20_update_mpcc,
118 : .set_input_transfer_func = dcn30_set_input_transfer_func,
119 : .set_output_transfer_func = dcn30_set_output_transfer_func,
120 : .power_down = dce110_power_down,
121 : .enable_display_power_gating = dcn10_dummy_display_power_gating,
122 : .blank_pixel_data = dcn20_blank_pixel_data,
123 : .reset_hw_ctx_wrap = dcn31_reset_hw_ctx_wrap,
124 : .enable_stream_timing = dcn20_enable_stream_timing,
125 : .edp_backlight_control = dce110_edp_backlight_control,
126 : .disable_stream_gating = dcn20_disable_stream_gating,
127 : .enable_stream_gating = dcn20_enable_stream_gating,
128 : .setup_vupdate_interrupt = dcn20_setup_vupdate_interrupt,
129 : .did_underflow_occur = dcn10_did_underflow_occur,
130 : .init_blank = dcn20_init_blank,
131 : .disable_vga = dcn20_disable_vga,
132 : .bios_golden_init = dcn10_bios_golden_init,
133 : .plane_atomic_disable = dcn20_plane_atomic_disable,
134 : .plane_atomic_power_down = dcn10_plane_atomic_power_down,
135 : .enable_power_gating_plane = dcn314_enable_power_gating_plane,
136 : .hubp_pg_control = dcn31_hubp_pg_control,
137 : .program_all_writeback_pipes_in_tree = dcn30_program_all_writeback_pipes_in_tree,
138 : .update_odm = dcn314_update_odm,
139 : .dsc_pg_control = dcn314_dsc_pg_control,
140 : .set_hdr_multiplier = dcn10_set_hdr_multiplier,
141 : .verify_allow_pstate_change_high = dcn10_verify_allow_pstate_change_high,
142 : .wait_for_blank_complete = dcn20_wait_for_blank_complete,
143 : .dccg_init = dcn20_dccg_init,
144 : .set_blend_lut = dcn30_set_blend_lut,
145 : .set_shaper_3dlut = dcn20_set_shaper_3dlut,
146 : .setup_hpo_hw_control = dcn31_setup_hpo_hw_control,
147 : .calculate_dccg_k1_k2_values = dcn314_calculate_dccg_k1_k2_values,
148 : .set_pixels_per_cycle = dcn314_set_pixels_per_cycle,
149 : .is_dp_dig_pixel_rate_div_policy = dcn314_is_dp_dig_pixel_rate_div_policy,
150 : };
151 :
152 0 : void dcn314_hw_sequencer_construct(struct dc *dc)
153 : {
154 0 : dc->hwss = dcn314_funcs;
155 0 : dc->hwseq->funcs = dcn314_private_funcs;
156 :
157 0 : if (IS_FPGA_MAXIMUS_DC(dc->ctx->dce_environment)) {
158 0 : dc->hwss.init_hw = dcn20_fpga_init_hw;
159 0 : dc->hwseq->funcs.init_pipes = NULL;
160 : }
161 0 : }
|
